The Best Nintendo Switch 2 Accessories
Featured in this article
The Switch 2 isn’t like other consoles. If you were meant to take your Xbox Series X to the park, you’d probably need a strange-looking backpack. For the Switch 2, portability isn't just a feature; it's a key selling point. With that in mind, there are two paths you can take to outfit your console for adventure, based on how you play.
If your Switch 2 will spend most of its life in the dock or in your hands on the couch, I’d recommend an attachable grip case. Like your phone case, these clamp onto the console and Joy-Cons, providing a minor shield for bumps and bruises. They often add extra features like ergonomic grips while still allowing access to commonly used ports. On the other hand, if you’re a world traveler planning to take your Switch 2 on every flight, train ride, or road trip, opt for a classic carrying case. These hold your console and games and usually have extra room for cables or adapters. You can toss these into your bag while packing up for a trip and know your console will make it safely to your destination.
Whatever road you choose to walk, I've got a slew of accessories to improve your experience and keep your console clean, charged, and ready to play. Read our Best Switch 2 Controllers guide for more.
Updated January 2026: We've added new options for cases, charging docks, game holders, and connectivity options.
Why Joy-Con Grips Are Worth It
One of the recurring complaints about the original Switch is that the Joy-Cons are super slim and not very ergonomic. Especially for folks with bigger hands, the Pro Controller is a much better option. For handheld play, extra attachments became increasingly common further into the console’s life, adding extra bulk and more traditional, rounded grips to the Joy-Cons.
Because the new Joy-Cons are still flat on the back, many manufacturers have gone ahead and built these grips into cases right from the jump. This is one of the main draws of adding a case to your Switch 2, especially if you plan to play primarily in handheld mode. The downside is that the console will no longer fit into some cases, although we have picks for both below.
Yes, Your Switch 2 Needs a Screen Protector
Unfortunately, you need a screen protector for your Switch 2, thanks to the built-in plastic cover that will likely scratch and scuff over time. In general, I'd recommend buying one from the same brand that you get your case or grip from. You'll avoid any issues with sizing or compatibility, and almost every accessory maker on this list offers some kind of discount if you buy them as a bundle, not to mention saving on shipping.
There are other factors to consider. Some dedicated manufacturers offer different finishes for specific situations, and applicators are also becoming more common, which helps make sure everything is smooth and lined up correctly.
Cases Don't Play Well With the Kickstand
One of the major upgrades Nintendo made for the Switch 2 is a new kickstand. It runs the width of the console, with two firm hinges, and it's a massive improvement for playing on the go. Unfortunately, case makers have struggled to figure out how to incorporate it, which is understandable. There's no clear attachment point, so most cases include double-sided tape and a kickstand-shaped chunk of plastic you can just stick to the back.
I’d worry more about lining it up wrong or potentially breaking the kickstand if you tried to remove it than I would about a slight gap on the back of the case. Because I had to swap through a bunch of cases, I generally skipped this step, and in almost all cases, the extra piece is only cosmetic. Instead, I briefly tested the included strips of adhesive on a single spot on the back of my Switch, just to make sure they didn’t leave any obvious residue.
Other Switch 2 Accessories to Consider
iMP Tech DLEX+LED Multi-Function Charger Stand for £35: Perfect for streamers or desk-bound players, this will keep your gaming space tidy and your controllers fully juiced. It has charging slots for four Joy-Con 2s and four original Joy-Cons on the main base unit, all with charge indicators, while two pop-out USB-C cables at the rear allow you to connect more conventional joypads, like the Switch 2 Pro Controller. Power is provided through the charging adapter you already plug into your console’s dock, which is in turn locked in place on the DLX2 with a dual USB-A block that feeds the power through. It’s compatible with the Switch 2, original Switch, and the Switch OLED, and the two USB slots you lose on the dock itself are replaced with pass-through ports on the left of the base for other accessories. Organizationally, the stand gives you somewhere to hang your headset, while a spring-loaded tray on the right holds and hides up to nine Game Carts. It can be a little fiddly to set up, and overall charging can slow down if you try to connect the maximum 10 devices, but once done, it’s a great storage solution, elevated by subtle but striking RGB lighting. However, like iMP’s mouse adapters, stock seems limited to Amazon UK at the time of writing. —Matt Kamen
Spigen Rugged Armor for $18: This molded grip case has heavy bumpers and thick Joy-Con grips, but it was tough to remove, which you'll have to do a lot, because it won't fit in the dock with the case on, and you can't separate the Joy-Cons either. This would be a good case if you're buying the console for a younger kid whom you don't trust to treat it gently.
Belkin TemperedGlass Screen Protector With Blue Light Filter for $30: While I liked the look of this screen protector, and the blue light filter is handy for late-night gaming sessions, the lackluster applicator frame isn't quite as nice as the other options. It's also a bit expensive, at $30 for just one.
Dbrand Prism 2.0 for $35: I liked the Prism 2.0 screen protectors and their application process as much as the Spigen above. But they’re slightly more expensive and only available directly from Dbrand, so if you buy them on their own, you'll have to pay shipping. If you're buying anything else, like a case or a skin, you'll get a discount and likely qualify for free shipping, making these well worth it.
Jsaux Joy-Con Charging Grip for $15: If you often play with the Joy-Cons detached, this charging grip from Jsaux lets you continue playing while charging the controllers in the process via the USB-C slot at the top of the handle. It also puts them at a more ergonomic angle, but keeping them attached makes some motion controls unusable, and I would've liked to see an internal battery.










.png)









.png)


.png)

.png)





.png)
